This camshaft set consists of two camshafts for your VR6 that includes lube and specs.

Fits all VR6 2.8 2.9L Engines

- 272° duration
- Overlap 113° (Intake/Exhaust)
- Lift 11.2mm (Intake/Exhaust)
- Increase of 10-12 HP

Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

This kit features parts used on 2003 and up models which extends the timing belt life up to a maximum of 160,000 km / 100,000 miles from the original 98,000km / 60,000 mile interval (manual transmission models) and 64,000 km / 40,000 mile interval (automatics) for older models (1999.5 to 2002).

Parts in this kit include the following:

1 - Timing Belt (Gates) long life version - 038 109 119M,
1 - Water Pump, with metal impeller  - 038 121 011 A
1 - Large Idler Pulley Bolt near Water Pump - N 905 969 02, Bolt, M10 x 55 mm Grade 8.8
1 - Large Idler Pulley - 038 109 244 M
1 - Lower Small Idler Pulley - 038 109 244 E
1 - Upper Small Idler Pulley - 058 109 244
6 - Washer M8 - N 011 558 11 M8
2 - Lock Nut  M8 - N 900 744 01
1 - Bolt  M8 x 40 mm Grade 8.8 - N 019 531 3
1 - Tensioner - 038 109 243N
1 - Vacuum Pump Seal - 038 145 345
1 - Camshaft Seal, directional, PTFE ( Teflon® ), 47 x 32 x  10 used on later ALH engines (2003 and up from VIN F1J-1-300 001) 038 103 085C or Camshaft Seal, bi-directional, DPH brand, 47 x 32 x 10  068 103 085E, for early ALH engines (prior to 2003 and up to VI 1J-1-300 000). PLEASE CHOOSE YOUR APPLICATION
3 - Injector Pump Bolts, M8 x 16 mm Grade 8.8 - N 903 285 04
2 - Engine Mount Bolt, M12-1.5 x 65 mm Grade 10.9 - N 102 096 03
2 - Engine Mount Bolt, M10 x 55 mm Grade 10.9 - N 105 167 01

This camshaft set consists of one camshaft for your G60 engine and includes lube and specs.

Fits all G60 engines

- 272° duration
- 110° overlap (Intake/Exhaust)
- Lift 11.2 (Intake/Exhaust)
- Increase of 8-10 HP depending on overall condition of engine

Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains

Set includes 6 pieces

- 4 Ignition Wires including plugs
- 1 Ignition Coil Wire
- 1 Impluse Sensor - Corresponds to original part # 051905381

Parts are delivered exactly as pictured for quick and easy installation.

Kits includes the following:

- Aluminum Crank Pulley (2.3kg/5.06 lbs reduction in weight)
- Aluminum Alternator Pulley (143g  vs. the original 370g)
- Aluminum Waterpump Pulley (187g vs. the original 410g)
- Aluminum Power Steering Pulley (224g vs. the original 454g)
- Made of 6061 T6 Aluminum

NOTE: Please specify whether or not your car has air conditioning when ordering!

Will ONLY fit 120A Alternators! Please order Item # AZVR004 if you DO NOT have a 120A alternator

Kits includes the following:

- Aluminum Crank Pulley (2.3kg/5.06 lbs reduction in weight)
- Aluminum Alternator Pulley (143g  vs. the original 370g)
- Aluminum Waterpump Pulley (187g vs. the original 410g)
- Aluminum Power Steering Pulley (224g vs. the original 454g)
- Made of 6061 T6 Aluminum

NOTE: Please specify whether or not your car has air conditioning when ordering!

Will not fit 120A Alternators! Please order Item # AZVR004/2 in this case

Kit includes the following:

- Aluminum Crank Pulley (2.3kg/5.06 lbs reduction in weight)
- Aluminum Waterpump Pulley (187g vs. the original 410g)
- Aluminum Power Steering Pulley (224g vs. the original 454g)
- Made of 6061 T6 Aluminum

Complete set of 6. Fits all 2.8 and 2.9L VR6 engines equipped with distributors and coilpacks. For engines equipped with distributors you may also order the matching ignition coil wire - part # AZS003

Complete set of 6. Fits all 2.8 and 2.9L VR6 engines equipped with distributors and coilpacks. For engines equipped with distributors you may also order the matching ignition coil wire - part # AZS011

Fits Passat (excluding Syncro), Golf II and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Fits Vento/Jetta III, Golf III, Passat and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Fits all 2.8 and 2.9L VR6 engines

This flywheel has been precisely machined and glass bead blasted. Flywheel is balanced within 0.02g!!! Core deposit required and will be refunded upon receipt of your original flywheel.

Fits all Corrado passenger side headlights (all years/models) 

Fits a multitude of vehicles such as Golf II, Corrado, Golf III, Vento and Jetta with a 4 X 100 bolt pattern

Drilled and slotted rotor helps vent gases and heat created by hard braking which can result in brake fade.

Dimensions: 226 X 10 mm (10.4')

Includes one pair