4-piece set. Features thick high quality velour that is easy to clean

This camshaft set consists of one camshaft for your G60 engine and includes lube and specs.

Fits all G60 engines

- 272° duration
- 110° overlap (Intake/Exhaust)
- Lift 11.2 (Intake/Exhaust)
- Increase of 8-10 HP depending on overall condition of engine

Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains

This camshaft set consists of two camshafts for your VR6 that includes lube and specs.

Fits all VR6 2.8 2.9L Engines

- 272° duration
- Overlap 113° (Intake/Exhaust)
- Lift 11.2mm (Intake/Exhaust)
- Increase of 10-12 HP

Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains

Fits Passat (excluding Syncro), Golf II and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Fits Vento/Jetta III, Golf III and Passat (both excluding Syncro) and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Fits all years and models

Conversion Kit includes the following:

- 1 Wiper Arm - left side
- 1 Wiper Arm - right side
- 1 Wiper Blade - left side
- 1 Wiper Blade - right side
- 2 Wiper Caps

Contrary to popular belief, you do NOT require two driver's side blades.

These wipers provide you with a noticeable difference when clearing your windows of rain, snow, mist or anything else that might get sprayed on your windshield while driving. The aerodynamic design allows greater downforce onto the glass when travelling at higher speeds, contrary to most wiper systems. Additionally, the blade itself is spring loaded which creates equal downforce along the entire length thereby increasing the cleared surface area. This is an investment you will not regret!

Additional wiper blades are also available as spares or replacements

Includes 1 pair

Fits G60 etc.

Fits such alternators as on the VR6 engine.

This lightweight pulley only weighs 143g as opposed to the 370g of the original part. This reduction in weight helps reduce rotating mass which translates into increased performance especially at lower rpm.

Made of 6061 T6 Aluminum

NOTE: Please specify whether or not your car has air conditioning when ordering!

Will not fit 120A Alternators! Please order Item # AZVR004 in this case

- includes an integrated harmonic balancer
- Wights savings of approx. 2,3 kg
- Provides better performance at lower rpm

Fits all G60 engines

Wird geliefert wie abgebildet. Kleiner Riss auf linker Seite. (siehe Bilder unter Details)

Der Schriftzug "ARZ-Tuning" wird geliefert auf einer Trägerfolie zum besseren übertragen, somit wird eine passgenaue Verklebung kinderleicht gemacht.

Der Schriftzug ist selbsklebend.

Maße ca. 150 mm x 23 mm

Selbstklebende Folie, Farbton Blau auf Chrom gedurckt

Maße ca. 150 mm x 23 mm

Selbstklebende Folie, Farbton Blau auf Chrom gedurckt

Aluminum. Includes 2 pieces

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

Uses a 10mm socket

Uses a 10mm socket

Direct replacement for original part # 321201356A