4-piece set. Features thick high quality velour that is easy to clean

This camshaft set consists of one camshaft for your G60 engine and includes lube and specs.

Fits all G60 engines

- 272° duration
- 110° overlap (Intake/Exhaust)
- Lift 11.2 (Intake/Exhaust)
- Increase of 8-10 HP depending on overall condition of engine

Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains

This camshaft set consists of two camshafts for your VR6 that includes lube and specs.

Fits all VR6 2.8 2.9L Engines

- 272° duration
- Overlap 113° (Intake/Exhaust)
- Lift 11.2mm (Intake/Exhaust)
- Increase of 10-12 HP

Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains

Fits Passat (excluding Syncro), Golf II and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Fits Vento/Jetta III, Golf III, Passat and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Set includes 6 pieces

- 4 Ignition Wires including plugs
- 1 Ignition Coil Wire
- 1 Impluse Sensor - Corresponds to original part # 051905381

Parts are delivered exactly as pictured for quick and easy installation.

This adjustable cam sprocket enables precise adjustments to your cam timing. Tweak your engine to provide you with the power band right where you want it!

Fits all years and models

Conversion Kit includes the following:

- 1 Wiper Arm - left side
- 1 Wiper Arm - right side
- 1 Wiper Blade - left side
- 1 Wiper Blade - right side
- 2 Wiper Caps

Contrary to popular belief, you do NOT require two driver's side blades.

These wipers provide you with a noticeable difference when clearing your windows of rain, snow, mist or anything else that might get sprayed on your windshield while driving. The aerodynamic design allows greater downforce onto the glass when travelling at higher speeds, contrary to most wiper systems. Additionally, the blade itself is spring loaded which creates equal downforce along the entire length thereby increasing the cleared surface area. This is an investment you will not regret!

Additional wiper blades are also available as spares or replacements

Includes 1 pair

Fits G60 with 6 ribbed belt. Made of 6061 T6 Aluminum

Fits such alternators as on the VR6 engine.

This lightweight pulley only weighs 143g as opposed to the 370g of the original part. This reduction in weight helps reduce rotating mass which translates into increased performance especially at lower rpm.

Made of 6061 T6 Aluminum

NOTE: Please specify whether or not your car has air conditioning when ordering!

Will not fit 120A Alternators! Please order Item # AZVR004 in this case

Fits such alternators as on the VR6 engine.

This lightweight pulley only weighs 143g as opposed to the 370g of the original part. This reduction in weight helps reduce rotating mass which translates into increased performance especially at lower rpm.

Made of 6061 T6 Aluminum

Will ONLY fit 120A Alternators! Please order Item # AZ6811 if you DO NOT have a 120A alternator

- Includes an integrated harmonic balancer
- Weight savings of approx. 2.3 kg/5.06 lbs
- Provides better performance at lower rpm
- 6061 T6 Aluminum

Fits all G60 engines. Made of 6061 T6 Aluminum.

Maße ca. 150 mm x 23 mm

Selbstklebende Folie, Farbton Blau auf Chrom gedurckt

Maße ca. 150 mm x 23 mm

Selbstklebende Folie, Farbton Blau auf Chrom gedurckt

This rear badge set features self-adhesive for a quick and easy installation.

Aluminum. Includes 2 pieces

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*. 

* Check local vehicles emissions requirement to see if this applies to your specific situation

This kit features parts used on 2003 and up models which extends the timing belt life up to a maximum of 160,000 km / 100,000 miles from the original 98,000km / 60,000 mile interval (manual transmission models) and 64,000 km / 40,000 mile interval (automatics) for older models (1999.5 to 2002).

Parts in this kit include the following:

1 - Timing Belt (Gates) long life version - 038 109 119M,
1 - Water Pump, with metal impeller  - 038 121 011 A
1 - Large Idler Pulley Bolt near Water Pump - N 905 969 02, Bolt, M10 x 55 mm Grade 8.8
1 - Large Idler Pulley - 038 109 244 M
1 - Lower Small Idler Pulley - 038 109 244 E
1 - Upper Small Idler Pulley - 058 109 244
6 - Washer M8 - N 011 558 11 M8
2 - Lock Nut  M8 - N 900 744 01
1 - Bolt  M8 x 40 mm Grade 8.8 - N 019 531 3
1 - Tensioner - 038 109 243N
1 - Vacuum Pump Seal - 038 145 345
1 - Camshaft Seal, directional, PTFE ( Teflon® ), 47 x 32 x  10 used on later ALH engines (2003 and up from VIN F1J-1-300 001) 038 103 085C or Camshaft Seal, bi-directional, DPH brand, 47 x 32 x 10  068 103 085E, for early ALH engines (prior to 2003 and up to VI 1J-1-300 000). PLEASE CHOOSE YOUR APPLICATION
3 - Injector Pump Bolts, M8 x 16 mm Grade 8.8 - N 903 285 04
2 - Engine Mount Bolt, M12-1.5 x 65 mm Grade 10.9 - N 102 096 03
2 - Engine Mount Bolt, M10 x 55 mm Grade 10.9 - N 105 167 01

Dimensions:
Length 285 mm
Width 240 mm
Height 95 mm
Weight 2.47 kg

Uses a 10mm socket

Uses a 10mm socket