|
|
|
| |
|
| |
| Showing 1 to 12 (of a total 12 items) |
Page: 1 |
| Sorted by: |
Name of Item - / + |
Item # - / + |
Price - / + |
|
 |
CERA TEC 300ml
CERA TEC is a high-tech ceramic wear protection product for all motor oils. CERA TEC reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Prevents direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines. Sufficient for 5 liters of motor oil.
Item #: TLM3721
Weight: 0.30 kg
20,65 EUR per piece
20,65 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
GEAR OIL LEAK STOP 50ml
Stops oil loss from dripping transmissions. Regenerates hardened rubber and plastic seals. No more oil patches to pollute the environment. Protects clutches from escaping oil, prevents deficient lubrication and damage to the transmission due to the oil level being too low.
Item #: TLM1042
Weight: 0.05 kg
10,90 EUR per piece
10,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
GEAR-OIL ADDITIVE 20g
This additive has been specially developed for manual and differential transmissions. The product significantly reduces wear and reduces temperature peaks which means quieter running, softer gear changes and energy conservation. The transmission runs more quietly generating less heat. Even older transmission run more quietly with increased efficiency due to the smoothing effect on tooth surfaces. Theproduct increases operational reliability and provides emergency lubrication properties due to the MoS2.
Item #: TLM1040
Weight: 0.02 kg
7,00 EUR per piece
7,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
GEARPROTECT 80ml
High-pressure antiwear additive based on the latest technology. Reduces friction and wear. Transmission runs smoother and quieter and gear changes are softer. With lasting effect. Smoothes tooth faces and increases load-bearing capacities.
Item #: TLM1007
Weight: 0.08 kg
31,95 EUR per piece
31,95 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
HYDRAULIC LIFTER ADDITIVE 300ml
Damps the noise produced by worn hydraulic lifters. Cleans valves and holes in the lifter and promotes optimum operation.
Item #: TLM1009
Weight: 0.30 kg
8,55 EUR per piece
8,55 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
Liqui-Moly Motor Clean - 500ml
Flushes out and cleans the engine from the inside. Highly effective cleaning additive dissolves sludge and lacquer formers, coats solid particles and liquid contaminants. These are drained with the used oil during the oil change. After carrying out this type of prepared oil change, the fresh oil is able to realize its full performance potential: ˜ The engine develops its full performance again ˜ Runs with less wear ˜ Exhaust gas properties are optimised ˜ Deficient lubrication is minimized.
Operational area: Add to the engine oil BEFORE the oil change. After approx. 10 minutes idling, drain used oil, change the filter and fill with fresh oil. 500 ml is sufficient for engines holding up to 5 litres of oil.
Item #: LM1019
Weight: 0.50 kg
16,90 EUR per piece
16,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
MOTORPROTECT 500ml
Fully synthetic engine-oil additive. Significantly reduces wear. High-pressure anti-wear additive forms a very thin layer on friction pairs inside the engine. The layer has ductile and lubricating properties and is effective for at least 50,000 km. The advantages are as follows: ˜ Significant reduction in wear ˜ Longer service life for the engine˜ Reduced fuel consumption and pollutant emissions due to the energy conserving effect ˜ Optimum engine performance and quieter running.
Item #: TLM1018
Weight: 0.50 kg
40,20 EUR per piece
40,20 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
OIL ADDITIVE
The anti-friction lubricant MoS2 forms a high load-bearing film of lubricant on all friction and sliding surfaces. This product reduces friction and guarantees energy-conserving performance for the unit. This yields the following advantages: significant savings in fuel and oil consumption, scientifically proved reduction in wear, fewer break-downs, emergency lubrication properties. Tested on catalytic converters and turbochargers.
Weight: 0.00 kg
7,60 EUR per piece
7,60 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
OIL LEAK STOP 300ml
Puts an end to oil patches contaminating the environment both on the road and in the garage. Oil Leak Stop regenerates rubber and plastic engine seals and reduces oil consumption via the piston rings (due to constant viscosity) and via valve guides (due to regenerated seals). Prevents blue smoke in the exhaust gases. Compensates for a drop in viscosity and reduces engine noise.
Item #: TLM1005
Weight: 0.30 kg
12,15 EUR per piece
12,15 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
OIL-SLUDGE REMOVER 300ml
Extended periods between oil changes, lower oil capacities, deficient fuel quality, lean-burn engines -- and therefore increased nitrogen oxides -- all contribute to sludge formation in the engine. This sludge blocks oil screens, oil filters and oil bores and the oil supply is interrupted. This results in engine damage. Oil-Sludge Remover cleans the engine, keeps the oil screen and oil borings free of blocka-ges, reduces deposits in the piston grooves, prevents deficient lubrication and protects the engine against engine damage.
Item #: TLM5200
Weight: 0.30 kg
15,70 EUR per piece
15,70 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
RACING BIKE-OIL ADDITIVE 125ml
With MoS2-anti-friction. Scientifically proved reduction in wear of up to 50%. Therefore extends the service life of the engine. The engine runs more efficiently and reduces the oil and fuel consumption. Increases engine smoothness, fewer malfunctions. Tested for compatibility with catalytic-converters.
Item #: TLM1580
Weight: 0.13 kg
7,00 EUR per piece
7,00 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
|
 |
VISCO-STABLE 300ml
Reduces oil consumption. Stabilises the viscosity of the oil. For,constant oil pressure. Visco-Stable also offers outstanding protection,against loss due to mechanical shear of the engine oil under the,hardest running conditions. Prevents engine-oil thinning in the event of frequent cold starts. The,oil consumption is reduced by the improved sealing of moving engine components. For this reason, the product is specially suitable for older cars. Reduces noise from hydraulic lifters.
Item #: TLM1017
Weight: 0.30 kg
9,90 EUR per piece
9,90 EUR
incl. 19 % Tax
excl.Shipping costs |
|
|
|
|
|
| Showing 1 to 12 (of a total 12 items) |
Page: 1 |
|
|
|
|
|
|
|
|
|
